Our services

Everything between you and clean water

Book any service on its own, or let us handle the whole job from siting to the pump.

01 · Borehole siting

Find the best place to drill

Siting is the survey that tells us where underground water is most likely to be found on your property, before any money is spent on drilling.

  1. Site visit

    We visit your property, look at the terrain and talk through how much water you need and what it's for.

  2. Survey

    We take readings across the site to understand the ground beneath it.

  3. Drilling point marked

    We peg the spot with the best chance of a good, lasting supply.

  4. Advice before you drill

    You get our honest view of what to expect, so you can plan drilling with confidence.

A survey team with equipment on open grassland
Survey firstDrill with confidence
A worker watching a rig drill a water well
Cased & cappedProtected for years of use
02 · Borehole drilling

A borehole built to last

We drill at the sited point with a rig suited to your ground, then finish the borehole properly so it stays clean and productive.

  1. Rig set-up

    We bring the rig to the marked point and prepare the site.

  2. Drilling to water

    We drill through soil and rock until we reach a water-bearing layer.

  3. Casing & gravel pack

    Casing holds the hole open, and gravel packing filters sand and silt out of the water.

  4. Flush & cap

    We flush the borehole until the water runs clear, then cap it securely.

03 · Borehole repairs

When the water stops, we get it going

No water, weak flow, dirty water or a pump that trips? We find the real cause and fix it, whoever drilled your borehole.

  1. Tell us what's happening

    Call, WhatsApp or send a message with the symptoms and your location.

  2. Diagnosis on site

    We check the pump, cables, controls, pipes and the borehole itself.

  3. Repair

    We repair or replace faulty parts, pull and reinstall pumps, and clear blocked or silted boreholes.

  4. Test & hand over

    We run the system and only leave once the water is flowing properly.

A technician working on pipework in an excavation
Any boreholeNot just the ones we drilled
A green water tank on a raised wooden stand
Stored & readyWater even when the pump is off
04 · Tank installations

Storage sized for the way you use water

A tank keeps water available through power cuts and busy periods, and a raised tank gives you pressure without a second pump.

  1. Size & position

    We work out the capacity you need and the best spot for it.

  2. Stand or base

    We install a tank stand for gravity pressure, or a firm, level base at ground level.

  3. Connect

    We connect the tank to your borehole and to the house, garden, troughs or irrigation.

  4. Fill & check

    We fill the tank and check every joint and valve for leaks.

05 · Pump installations

The right pump for your borehole

The pump is the heart of your water system. We match it to your borehole's depth and yield, your power supply and how much water you use each day.

  1. Choose the pump

    Submersible, surface or solar-powered, depending on depth, demand and power.

  2. Install

    We lower and set the pump, run the cable and rising main, and fit the controls.

  3. Solar or electric

    For solar pumps we mount and wire the panels; for ZESA we connect to your supply safely.

  4. Commission

    We run the pump, check the flow into your tank and show you how to look after it.

A pump sending water across a green field
Solar optionsWater without the power bill
FAQs

Questions, answered

What people usually ask before a borehole job. Can't find your answer? Ask us directly.

What services do you offer?

Borehole siting, borehole drilling, borehole repairs, tank installations and pump installations. You can book any one on its own, or have us take care of the whole job from siting to the pump.

Why do I need siting before drilling?

Groundwater isn't spread evenly underground. A siting survey finds the point on your property with the best chance of a good supply, which lowers the risk of drilling a dry or weak borehole.

How deep will my borehole be?

It depends on the ground where you are. Some boreholes reach water quite shallow, others need to go much deeper through rock. After siting we'll give you an honest estimate before drilling starts.

How long does drilling take?

Most boreholes are drilled, cased and capped within a day or two once the rig is on site. Hard rock or very deep holes can take longer. We'll give you a timeline with your quote.

Can you fix a borehole you didn't drill?

Yes. We repair any borehole: no water, low flow, dirty or sandy water, and pumps that trip or have burnt out. We diagnose the problem on site before recommending a fix.

Do you install solar pumps?

Yes. We install submersible, surface and solar-powered pumps. We'll recommend the right one based on your borehole's depth, how much water you use and the power you have on site.

How do I get a quote?

Send us a message through the contact form, call us or WhatsApp us. Tell us your location and what you need, and we'll come back to you with a quote.

Ready for water you can rely on?

Tell us about your site and what you need. We'll send you a clear quote for siting, drilling, repairs, tanks or pumps.

Chat with us